The Mavros BNC cable is engineered as a cable with extremely precise transmission and termination standards, incorporating the same microporous PTFE (Teflon™) dielectric insulation as the other Mavros interconnects.
The centre conductor is comprised of a monofilament conductor and 18 strands of super pure copper wire insulated by a thin layer of microporous PTFE. This new dielectric behaves almost like the theoretically perfect insulator –free air – with minimal effect upon the signal being transmitted. The previous highest performance insulator, solid PTFE, has a dielectric constant of around 2.1 whilst the new PTFE (Teflon™) foam improves this figure to around 1.5, providing for a 30% greater signal velocity and better signal integrity, particularly in the area of high frequency timing and stability.
The co-axial double shielding layers are an aluminium Mylar™ foil followed by OFC (Oxygen Free Copper) braiding after which the whole cable is protected by a PVC jacket damped with cotton yarn.
With a termination impedance of almost exactly 75 Ohms at 1 MHz and a low conductor-to-conductor capacitance of around 50 pF per meter the Mavros BNC interconnect perfectly matches consumer digital audio equipment to ensure error-free transmission of high speed digital signals. The result is evident in the timing and dynamic range of musical performances where the temporal ‘smearing’ of lesser cables is absent.
| Construction |
Co-ax (1/0.7 Monofilament + 18/0.14) |
| Material |
Silver Plated OFC |
| Dielectric |
Microporous PTFE (Teflon™) |
| Screen |
Braid OFC with Al Mylar,™ 100% |
| Capacitance |
54.35 pF/m |
| Inductance |
0.230 µH/m |
| Resistance |
0.065 Ohms/m |
| Impedance |
77.43 Ohm at (1MHz) |
| VOP |
0.81 |
| Outside Diameter |
8.5mm |