Trade In Available

Any Questions? - 01233 624441

Free Delivery Available

Soundcraft Price Watch

About Rega

Rega Factory Tour:


Rega Factory Tour

Welcome to Rega Research Ltd.

From our purpose built 30,000sq ft manufacturing and warehouse facility in the South East of England, Rega now sells worldwide to 41 different countries, has more than 90 employees and is currently hand assembling more than 40 different products.


Loudspeaker Production Area - RS range of loudspeakers


Did you know? We design and build our own bass, mid-range and high frequency units in house.
Every voice coil and crossover inductor is wound and manufactured to exact specification before each unit is meticulously hand assembled and tested before fitting into a cabinet.

Tonearm Production - RB202, RB303 RB808 & RB2000


Rega has two purpose built tonearm manufacturing departments. One area is dedicated to the production of the RB101 tonearm used on the multi-award winning RP1 turntable The other makes RB202, RB303, RB808 & RB2000. Every tonearm we build is hand assembled to the tightest tolerance using Rega 
designed tools and jigs.These measures ensure the highest quality and accuracy throughout each and every assembly.

RP1 turntable production - RP1 Turntable and RB101 tonearm.


Current demand requires a skilled team of 8 people to build a minimum of 120 units every single day.The same team also make the same quantity of RB101 tonearm. This high level of demand, required a huge investment from Rega to build a new department to house production on this scale.The success of this product has continued since launch and the simple set up of this plug & play design is an easy step back in to the world of vinyl for many users.The only thing entry level about this handmade turntable is the price. 


Electronic production Area -  Amplifiers, CD players, DAC's & Phono stages.

Our electronic production area is our fastest growing department, building our broadest range of products. The success of the DAC and  Brio-R ensured the introduction of many new groundbreaking 'R' range electronics, all of which perfectly complement any system at any price. Every amplifier is flash tested for safety,soak tested for one hour and the white noise tested for a further fifteen minutes. Finally all buttons and remote functions are manually operated to test for functionality before a thorough clean before inspection and packing.

High-end turntable production - RP8 & RP10 Turntables


The new skeletal range of turntables are the culmination of many years of development work taking Rega's design philosophy further than ever before. A highly skilled team work to the highest level hand assembling and testing each unit in a custom designed department. These products are some of our most labour intensive with each model being built over a two day period to allow for curing times and to ensure our strict quality control demands are met.

Moving Coil CartridgeIncluding curing times, it takes three days to build each of our Apheta moving coil cartridges. 
Meticulously hand assembled using 3D microscopes, each iron cross has the coils wound by hand on our purpose built winding jig. Each process takes extreme levels of concentration and skill and only a handful of people ever achieve the required dexterity to successfully build such a complex assembly.

Electronic CNC assembly

By October 2013 it became essential to bring many previously outsourced smaller jobs back in house. Another brand new department was constructed to house over £200,000 worth of automated production equipment. This essential machinery covers multiple jobs from coil winding, stripping, tinning, crimping and soldering. This decision gave us back the control we needed over both quality and quantity and directly improved our production and delivery times. This ever growing department is a key part of Rega's recent growth and continued success.


High-End Electronics production 'The Reference range'

The 'Reference range' is the highest level of performance achievable from Rega electronics. Unlike any other department, each product is built one at a time from start to finish by the same person. Every part is bespoke and all the casework is machined from solid aluminum billets. (The Osiris amplifier weighs in at hefty 38 Kg when packed).Once built, the owners manual is serial numbered and signed by the technician who built and tested the unit prior to being carefully packed in an Egyptian cotton sleeve before boxing.




The history of Rega

First Television...

A reasonably normal childhood was spent building electric guitars, flying model aeroplanes, playing the clarinet and breeding budgies. At fourteen, Roy's mum asked him if he wanted a television or a record player in the house. Roy begged for a record player. His mum bought a telly!

At eighteen years, Roy built his first pair of loudspeakers in perfectly sealed cabinets. Not the first Rega product, but Roy was on his way. His interest in hi-fi evolved from a passion for music. 'Bliss' in those days was a live concert, a folk club, or any kind of record player.

Then a flat mate demonstrated his hi-fi system: Garrard SP25 turntable, Sonotone 9TA cartridge, Rogers HG88 amplifier and Wharfedale speakers. Roy realised his record player had room for improvement.

The first system...

A Collaro deck turned up on a rubbish dump and after much adaptation became Roy's first hi-fi record deck. When a friend gave him an old Connoisseur, the Collaro went back to the rubbish dump, and the modification began again. This turntable was reviewed in Hi-Fi Sound in 1972, as part of a series called Casebook, which examined readers hi-fi systems. In the early seventies the turntable was seen as such an unimportant part of the system that the reviewer assumed the excellent results must be due to the speakers. These were impossible to miss huge concrete affairs housing Super 8 drive units - but could hardly account for the sound quality of the whole system. The reviewer was puzzled.

The first Rega - A star is born

Roy was now working for Ford as a technical editor but spent most of his free time installing friend's hi-fi equipment and building loudspeakers to sell. He became a part time retailer and found he had to spend a ridiculous amount of time repairing new turntables before his conscience and common sense would allow him to sell them to others! Out of frustration and a strong feeling he could do better, the Planet turntable was born. Roy and a partner registered "Rega" (Tony RElph, Roy GAndy). In 1973 and for a couple of years, Roy stayed at Ford and made turntables in the evening, helped by his partners: mum (who agreed to help out for two weeks and stayed for fifteen years!) and a succession of lads. The first turntables were sold through Cosmocord in the UK and a year later under the Rega name in West Germany, Denmark and France.

Roy was now able to leave Ford; he collected a redundancy check and promptly blew it on a factory in Rochford. Soon after the partnership with Tony Relph split, Roy swapping his share of Rega. Terry Davies joined as Rega's financial administrator.

In 1975 the Planar 2 was developed and quickly took its place in the market as the finest budget turntable. In June 1977 HI-FI News and Record Review announced the Planar 3 saying "The complete unit is worth a look"! Rega's usual blaze of non-publicity.

By 1980 Rega employed thirteen staff, exported to twelve countries, had twenty UK dealers and there were those dreaded 'waiting lists', mainly by eager customers shop-hopping!

 In 1980 Roy found an old mill (Park Street) in a residential area in Westcliff-on-Sea, Essex. The building had been deserted for twenty years and judging by the rot, seemed to have a millstream still running through it! Rega snapped it up for £30,000 and turned it into a compact but highly functional hi-fi factory, liberally painted bright green.

In 1983 after five years of dabbling and two years of intensive development, the RB300 and RB250 tonearms were produced. For ten years Rega had used Japanese and Danish manufactured arms on the turntables but after some searching Roy found a casting company prepared to work with him to develop an entirely new production method enabling the one-piece tube to be cast.

Rega won an international award for the RB300 casting, presented by Modern Metals 'awarded in open competition for excellence in the field of Aluminium Die Casting'. In their accompanying letter they wrote: 'we are still trying to figure out how you produce such a long cored hole so accurately'. This made up for never winning any prizes breeding budgies!

For five years, Rega sold a cartridge, the R100, made to specification in Japan. This was followed by the RB100, which was designed and developed by Rega. However, the cartridge had inevitable design limitations as it was being manufactured by an outside company.

In March 1988 the Bias and Elys cartridges went into production in house and sales exceeded 1000 in the first month, five times more than anticipated! The cartridges were a vital step on the way to a complete Rega system.

Completing the system...

In the summer of 1989 the Ela loudspeaker was introduced. Designed and developed at Rega, they were originally produced in Denmark but soon thereafter were manufactured in house.

In 1991, a period of dramatic expansion was heralded with the move into the world of electronics and the launch of two amplifiers, the Elex and the Elicit. The reason for producing these two amplifiers was simple; Rega was presented with a design it could not resist! Most importantly, the amplifiers fit into the company policy - which is to manufacture high quality, specialist hi-fi components that are reliable, consistent and sensibly priced. This development completed the Rega system.

A new factory was built in 1992 on the Temple Farm Industrial Estate in Southend-on-Sea under Roy's design and guidance to house the production of loudspeakers and amplifiers and to ensure room for further developments.


Over the past 40 years we have come a very long way. Now selling to more than 40 export markets and producing on average 2000 turntables alone every month, Rega now employ's almost 90 people in our purpose built 30,000 sq ft design and manufacturing facility in Essex, England.

Rega continues to grow and develop new products, all of which strictly follow those early Rega virtues of excellent build quality, long life and amazing value for money all backed up by a lifetime warranty against manufacture defects.